Servo Ballscrew Units

Servo ballscrew units. Programmability. Make off-sets for tool depths, rpm changes from the screen. Use them for drilling or tapping. AC motor for the spindle or servo. You specify the motor being used, we install the plates and pulleys accordingly. Mount in any direction. The most versatile units.

Quill Unit Servo Model 8301

Setup: 8301 with direct drive servo, 2 axis with ER Collet spindle

Model 8300

3″ stroke
2.375 quill diameter
2.500″ center height
600# thrust
7200 rpm( STD.)
.01 to 200 ipm
600 lb-in torque
Repeats to .0005″

Download the files to your computer and open them with the appropriate software.

Quill Unit Servo 8400 Model

Setup: 8400 unit, sliding spindle support, 40 taper spindle, and overhead belt housing.

Model 8400

4″ stroke
1800# thrust
680 lb-in torque (std.)
1500 lb-in torque (optional high torque “HT”)
Ready for 12mm over-travel and home switches
Various spindle noses

Download the files to your computer and open them with the appropriate software.

Quill Unit Servo 8600

Setup: 8600 unit with 40 taper spindle and extended belt housing

Model 8600

6″ stroke, 1800# thrust
680 lb-in torque (std.)
1500 lb-in torque (optional high torque “HT”)
Ready for 12mm over-travel and home switches
Various belt / pulleys / motor arrangements
Various spindle noses, mount in any orientation

Download the files to your computer and open them with the appropriate software.

Servo Ball Screw Unit Model 8100

Setup: 8100 unit with guide bar support, overhead belthousing, and heavy motor support.

Model 8100

10″ stroke
1800# thrust
680 lb-in torque (std.)
1500 lb-in torque (optional high torque “HT”)
Ready for 12mm over-travel and home switches
Various spindle noses

Download the files to your computer and open them with the appropriate software.

Ball Screw Unit Model 8700

Setup: 8700 Servo Ballscrew Unit with 40 taper and extended belt housing.

Model 8700

7″ stroke, 4 1/2″ center height
4500# thrust, 1 1/2″ steel drill capacity
3500 lbs-in torque
Ready for 12mm over-travel and home switches
Various belt / pulleys / motor arrangements
Various spindle noses, mount in any orientation,

Download the files to your computer and open them with the appropriate software.

FD15S-150-480

Model FD15S-150

5.9” stroke, barrel mounted
4500# thrust, 1 ½” steel drill capacity
3500 lbs-in torque, switches included
3500 rpm max, various spindle noses available.

Download the files to your computer and open them with the appropriate software.